First portable operation with the Packer 6m amplifier

I decided to take the bull by the horns and activate a SOTA summit on 6m only, using my newly-built Packer 6m 30W linear amplifier. The summit I chose was Tamborine Mountain, VK4/SE-059.

My rig this time was the Yaesu FT-817 and the antenna was a homebrew 6m dipole, strung up as a sloper.

The rig connected to the amp and the LDG antenna tuner. The battery is a 7a/h gel cell. The power cords are routed through a SotaBeams 4-Way distribution box.

As soon as I put out my first call, the game was on. In the space of a short 30 minutes I had made 15 contacts. Wonderful.

The action came thick and fast and the view was excellent.

One aim of the activation was to test the amp, especially how long the battery would last as it draws around 6A.

At the start of the activation my battery had 12.58V, and at the end, 12.49V. That’s pretty incredible, especially seeing I was operating almost continuously. Input power from the radio was 1W and output 30W.

Another test I carried out (with Peter VK4JD) was to get an idea of the difference the amp made to an actual QSO. On bypass, with 1W, my signal was down some 20dB. So the amp was doing a fine job.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s