Sunday 21st May 2015 was to be a good opportunity to work some Park to Park contacts as the VK5 mob had organised a mass activation to coincide with the WIA AGM. So I decided to activate Springbrook summit VK4/SE-011 and Springbrook National Park VKFF-0463.
The only problem was that Cyclone Debbie had washed away all bridges leading up to Springbrook. The only access road was a back road through the Numinbah Valley. So my wife and I set off nice and early on the 1 hour 40 minute run, but missed the crucial turn and ended up going the normal way up, via the Gold Coast. By the time I realised my mistake it was too late; we were committed.
Just as we drove into the Springbrook National Park, we encountered a road block. Those manning it told us what I suspected. If we wanted to reach the summit we’d have to retrace our route back and go the back route – an additional 40 minutes they told us. So we decided to set up the station along the banks of the river just inside the boundary of the park.
My rig for the day was the Yaesu FT-817 with an LDG Z-100 Plus ATU, 7a/h gelcell and an endfed antenna supported by a squid pole. My paddle was the Pico Paddle from Palm Radio in Germany.
All went well and I heard loads of traffic on 40m, all working the various VK5 parks. It was the first time I had been working against pile-ups! Fortunately I was able to tail gate a few contacts and worked two parks: Gerard VK2IO in VKFF-1278 and Rob VK2AAC/2 in VKFF-0004. That was the end of my SSB contacts as my 5W was no match for the 100W stations I was competing with. So it was out with the Pico Paddle and within a few minutes I worked Mike VK2CCW and Ian VK2BJT. CW is really great as it allows you to make contacts despite being low power.
I wasn’t able to activate the summit for SOTA; that will be another time now as I have unfinished business. But we did get to log four contacts towards WWFF and saw first hand the damage a cyclone can cause.
These are some of the trees that were up-rooted during the cyclone.