Stand for my Nissei SWR & Power Meter

I decided it would be nice to have a wooden stand for my Nissei SWR and Power Meter. I wanted to have the meter standing at an angle so that it would be easier to read while operating at the bench in my shack.

So I found some ply wood and some sheets of foam material and got to work. Once the basic design was proved, I screwed it all together and applies two coats of mahogany varnish. Then I cut the foam to fit the stand.

I am happy with the end result. And it works too.

The stand angles the meter so that it is easier to read while operating. Looks good too.